The 7 Best Technologies Of The Colour Television

Buying Guide Plasma TV

Introduction

In six short sections, we will help guide you to make informed decisions about buying The plasma TV you need for your home theater or living room, the sample application in commercial, industrial or retail or boards.

The sections in this Buying Guide are arranged in an order and progress that we believe more useful to communicate critical information to buy a plasma TV. First, let's look at the nature of the environment which sets the plasma. Then see what kind of content you intend to watch TV and what kind Device A / V to be used to determine the type of plasma for your needs. Next, we examined the plasma sheet that you need to know about the problems and pay attention. Finally, let's look at the prices and other issues of cost you can consider.

Ready? Home.

Televisions Plasma Environment

Calculating the correct distance to the implementation of the environment of the plasma TV, a primary consideration is to determine the screen size in the ground plane or space showing the plasma.

Plasma screens are measured diagonally across the TV screen as any another. You can usually choose between the following dimensions: 32 ", 40", 42 ", 46", 50 ", 61" or 63 ". The biggest thing is not always better, and some should be kept a distance between the plasma TV and viewing area for optimal viewing experience. Sitting far away decreases global impact. Sitting too close, however, can also have their own problems when you start to see "The structure of the screen" that is, points or pixels that make up the plasma screen. The right distance depends on the size of your TV.

– For 32 "to 37" TV screen 6-10 feet is necessary.
– For 42 "to 46" TV, 10-14 feet away from the screen is necessary.
– For TV 50 ", 12 to 16 feet away from the screen is necessary.
– For 60 inch and larger TV, at least 15 feet of display space is needed.

To determine the appropriate size for television, you should also consider the space required to install the unit. When you embed a plasma display unit, allow at least 3 inches of free space on the upper unit and adequate ventilation space of at least 2 inches behind it as well. Remember, too, that most plasma screens have no built-in speakers, so you need enough space to connect the speakers.

Viewing angles: More TV placement Viewing angle is another factor that influences the viewing experience. Plasma TVs today offer viewing angles approaching (and sometimes higher) 170 degrees. Much better than the viewing angles of LCD and projection TVs, and wide viewing angles of plasma displays results in a clear bright image for any person in the room, no matter where they sit.

Photo Lighting TV room and lighting is also important in the area where the plasma TV set up. Plasma TVs generally do an excellent job in a room with normal interior lighting, but viewing optimum may be possible in areas where direct sunlight too. Therefore, the windows that let in direct sunlight blinds or curtains that can be easily removed Adjustable screen brightness. The light from a window behind the TV also makes it difficult for eyes to adjust screen brightness, and window treatments is recommended in these cases. A bit of retro controlled lighting could also be useful as the backlight gives the black portions of the image deeper, darker look.

Altitude can increase noise levels, if you live feet from Denver, Santa Fe or other over 6,000, please note that some plasma displays may begin by noise. This is due to increased pressure on the gases contained in the glass substrate plasma screen, a phenomenon that is the hardest working unit to cool the display element. Check if the manufacturer has a maximum altitude of configuring the plasma in high altitude areas.

What you see on your plasma TV

You can choose between HDTV (high definition TV) and EDTV (Enhanced Definition TV) with your choice of plasma display. What is the type you prefer depends the type of material intended to be seen in the plasma.

EDTV is the perfect entry point into digital television with a 16:9 widescreen resolution image that is 200% higher than today's analog televisions. On the other hand, HDTV has up to four times the resolution and colors compared to EDTV, offering the latest audio visual experience.

At present, only a limited number of programs are broadcast in true high definition format (all major broadcast networks HD counterparts to their regular broadcasts an analog signal "). In fact, if you plan to use a plasma TV for regular TV programming, you may be surprised to know that regular TV programming, it can even appear slightly worse than the big screen exaggerates the flaws in standard TV programs. Imagery DVD of most DVD titles currently on the market today do not work so well in a high-definition plasmas. In fact, these images DVD seem more EDTV plasma units, because the image resolution of a widescreen (nominally 740 x 480) DVD is more suited to the actual resolution (852 x 480) Plasma Display EDTV.

Why bother with a HD TV at all you may ask? Because HDTV, along with a genuine high definition or a source of high quality images can be really impressive. DVD Player with Progressive Scan paired with, say, one of the titles recently released HD-DVD coming to Blu-ray (encoded in true high definition format), your plasma HDTV can come to life and show the image quality alike. And as more TV programming available in high definition with the threat of the deadline for the FCC to switch to high definition digital format plasma will be more content to watch television. One thing is certain: your HDTV will not be obsolete anytime in the coming years.

Devices your plasma TV

With plasma TV models today, almost all have multiple entries that connect different devices, with 32 "or larger screens with inputs for connection of at least six different components of A / V. What are video components do you have now, and does not intend to add the Future?

At a minimum, you'll probably want to connect your antenna or cable and a DVD player and maybe a video. Other possibilities include a receiver satellite TV, game system, or TiVo hard disk recorder. And if you use a video camera, you'll want a set of front A / V inputs on your new TV.

The new plasma televisions include digital inputs such as HDMI or DVI that accept HDTV signals from your cable box or satellite (and even some players DVD) in digital format. Some plasma televisions also include a DVI or VGA input for PC, This allows your plasma unit to pull double duty as a monitor PC.

Connection Tip: If you send video signals through your receiver home theater, you can connect video sources further. Most home theater receivers offer video inputs and field trips to enable video switching, which allows you to choose your video sources. If yours does not, you may be able to connect your video components to your receiver, which will send the selected video signal to your TV. many receivers have S-Video connections as well, and some even include component video switching.

Plasma TV Specifications When comparing plasma TVs, it is important to know what to look for the meaning of the specifications you're presented with. Here's a quick overview of the features you need to weigh before making that important purchase decision.

Resolution: The resolution is a determining factor in selecting a plasma TV. Want to EDTV or HDTV? HDTV with a resolution of at least 1024 x 720 is the ultimate experience visual and audio, but what is available for consultation on the hard disk is limited to a few cable HD channels as well as new DVD titles and necessarily short distance from the HD-DVD and Blu-ray. On the other hand, currently available DVDs most actually perform better when placed on EDTV, because the image resolution of a widescreen (nominally 740 x 480) DVD is more suited to the actual resolution (852 x 480) Plasma EDTV. Choose the type of plasma TV you want, therefore, is a question that should be considered along with the type of content that frequently watch or will watch on the plasma.

Input: A plasma screen TV should work with any video component existing standard A / V, S-Video, or component video outputs. In addition, most plasma TVs have DVI or HDMI for use with HD sources. Some plasma TVs also have VGA input connections that allow them to be used as PC monitors. At a minimum, look for the following features in a connection Plasma: DVI-I or DVI-D, Component, RCA or composite and S-Video. Taking into account the current component set-up, as its system of satellite, cable, DVD, stereo and external components and see what kind of inputs or connectors they use.

Receiver: Check your plasma to see if it supports HD or HD integrated. A plasma TV HD Ready is essentially a monitor that needs an external tuner source before it can function as a TV. A panel has an HD tuner all and ready for use. If you get your HDTV programming via cable or satellite rather than by air, you may not need a tuner at all, you will be using the set-top boxes provided by your local cable / satellite to receive HDTV programming. Check with your cable or satellite providers for more details. Some cable or satellite companies do away with the decoders and provide their subscribers with cards instead of cable. Check with your cable, satellite, cable and cards if they provide the type of cable cards that offer, then check the specifications in the plasma cable card slots.

Contrast ratio: Contrast ratio is the measure that determines the variation between whites and darkest parts of the image. This clarification is important because plasma TVs a contrast ratio of clay and small images will be dark gray, while light images appear blurred. A good measure of contrast ratio 1000:1 or more. Nothing less than 1000:1 especially in a set that is 42 "or more can not provide the optimal viewing experience.

Brightness: Without sufficient brightness, Your image is soft and muddy, even in a dark room. Distance display, screen size, and ambient light also affects the need for capacity more light. A rating given in the brightness of 550 cd/m2 or higher is good, but not stuck in the many technicians in the list. Instead, make sure the screen is bright enough for your needs as part of its visual inspection.

Group Life: Look for a minimum of 60,000 hours of life in specifications of your plasma panel. You can see how long it would take before the panel brightness is half compared to when he was nine. A carries 60 spec 000 hours over 20 years of observation to eight hours per day. (This approach vary, depending on the source and type of content, configuration, environment, and use the plasma TV.)

Anti-burn-in/Pixel Shift Burn-in refers to the burned remains on the screen after a static image remained in plasma for a long period of time. To minimize or prevent burn-in, determine if the plasma burns in the use of protection, such as management parameters energy image pixel full-time or shift (both vertical and horizontal) screen technology or automatic functions.

Speakers: Yes to use an external surround sound system, speakers need not be, but most plasma TV sets include speakers from 12.7 Watts nominal pre-amplifier which is much better than the TV classic and sufficient for most viewing. Check the specifications of the plasma screen to see if it comes with speakers and the speakers are removable.

Universal Remote: A universal remote can take the place of having a remote control so that control all the different components of your TV system, such as DVD, audio cable / satellite If you are considering buying a universal remote control, check whether it is compatible with all plasma your choice Make sure the plasma accepts universal remote devices.

Consumption: Power consumption for plasmas range from 240 watts to 500 watts If you are concerned about the amount of energy a plasma set can be used, check its specifications to determine power consumption. The units tend to have greater power requirements of the screen increases. A good rule is to compare the units of the same size and more powerful units tend to use lower components in order.

Installation and mounting options

There are essentially two options for installing a plasma TV: the presentation in a table stand, a car or its equivalent to the horizontal surface, or hang the plasma TV (in a wall or ceiling, wall mounting).

One of the main advantages of plasma televisions is the flexibility of mounting and installation options are available. However, due to the size of the TV, the set presents own set of issues to be taken into account.

For the wall (or ceiling) mounting, you need two people (ideally) with at least one with enough experience to determine the strength the wall behind the wall, and the right equipment for use, for example, anchors, screws, etc. The last thing you need is your new plasma TV over the wall and break into pieces due to improper mounting of the wall. Professional installation is highly recommended in this case.

Then presents several options to consider mounting TV:

table legs are very popular for plasma display units. These units, however, they are not unique and universal – all devices. Sometimes one is provided with the TV itself, sometimes you have to buy the stand separately. More consumers facing plasma TVs come with their own support for table, used whenever there is enough room table to support television. These Units are tailored to the manufacturer's specifications as each plasma display has its own requirements on the form whose booth is located in the plasma. The database allows the maximum flexibility, because nothing is permanently fixed to the wall. (Add graphic)

Plasma TV trucks are commonly used in business applications for fairs and presentations on the premises. Table carts are often used in a court, or up to the edge of a conference table for maximum visual presentation. Shopping the table may contain a platform for placing a DVD player, laptop or a VCR. (Add graphic)

Flat wall mounts maximize savings benefits of space plasma technology. This is usually the cheapest option, and add at least two inches to the overall depth of the plasma unit. It is used in rooms of the house, rooms or meeting rooms and business to achieve maximum displacement sleek plasma screens are known. (Add graphic)

Tilt wall mounts that let you set your plasma TV above eye level, maintaining the unity of the road, but can be easily seen from anywhere Room. A tilt wall usually allows 15 to 20 degrees tilt (depending on the brand of the attachment to the wall). This option is often used to install plasma screens above the houses and rooms, and is also used for exhibitions or retail industry in general (with or without roof support attachment). Tilt the wall ads 4-6 inches to the depth of the screen mounted. (Add graphic)

Articulating swivel wall mounts use weapons plasma to drive near the wall and the road when the device is not used. Were removed, mounted device that allows you to disable the screen 120 degrees to each side and 10 degrees up or down. Add between 3 or 4 inch mounting depth plasma (according to the manufacturer of the sleeve), and is used for maximum flexibility in sports bars, library studies, and commercial display operations. (Add graphic)

Montes allow you to mount your television plasma in which you want in the case of a wall is not available. This option is usually combined with a tilt mount, so the screen can be adjusted to low for easy viewing. The length of the ceiling mount poles vary according to the needs of customers, but standard lengths are 24-43 inches. Roof displays are generally used for the airport counters, hospital rooms, and bedrooms. (Add graphic)

Prices and other expenses

Plasma TVs are expensive, but they fall into a few categories. Below is a rough guide to the units online retail and plasma (in the preparation of this document, May 2006).
– $ 1,000 to $ 1,500 can buy a 42 "plasma TV
– $ 1,500 and $ 3,000 can buy a plasma TV 50 "
– More than $ 3,000 can buy a plasma up to 65 "
Also: – less than $ 1,500 can buy a refurbished plasma EDTV
– For $ 2,000 you can buy an EDTV plasma
– More than $ 2,000 to buy a plasma HDTV

In addition to the cost of television itself plasma, you may want to consider the price of accessories such as cables, surge protectors, audio equipment, furniture and room treatments to get a realistic cost expenditure to buy your Plasma TV.

Finally, consider the "standard" charges that apply to the purchase: tax sales when the TV is bought in a brick and mortar establishment, shipping (especially if the TV is bought online), and the delivery and / or charges installation. Review and compare manufacturers' warranties for various brands of plasma TVs, extended warranties are always extra.

About the Author

Microtek Lab Inc. is a consumer electronics company focused on scanners, plasma and lcd televisions, digital projectors, lcd monitors, digital cameras, home theatre equipment, and accessories. You can view their online store at store.microtek.com Use of this article is permitted provided that the article is used in its entirety.

Tim Lovejoy – TV Presenter